top of page
NA0D.COM
na0d
13 hours ago1 min read
ASL 3 is In Service
Over the last few days, I've been rebuilding my entire Allstar system, upgrading all the controllers to the newest Allstarlink software,...
0 views0 comments
na0d
Dec 53 min read
Some New Gear and a litany of chatting....
Well, I found the Brentwood VARA radio has gone deaf. No wonder nobody can get into it. Figured it out when I did some work and replaced...
0 views0 comments
na0d
Nov 262 min read
The Digital Effort Continues.....
There isn't enough time in the day, but here it is... Purchased a few new antennas for VARA in Brentwood and Fort Smith. One showed up...
0 views0 comments
na0d
Nov 71 min read
Flippin Frankenpeeter
You read that right.....I cobbled together some old junk and turned it into a repeater. And it works. An old, DOS based Kenwood TK-860...
0 views0 comments
na0d
Oct 182 min read
New Stuff and Repairs
Well, had some time and got a few things changed around. There is a huge list of stuff to do and I'll get to it as time comes along. So...
7 views0 comments
na0d
Oct 91 min read
WINLINK and current status with Hurricanes
Winlink status with hurricanes
5 views0 comments
na0d
Sep 291 min read
Hub moved to Flippin and Natural State Network
iax.na0d.com My hub for all my repeaters has been moved to my new house and is online. Still lots of work to do, but this is here, along...
1 view0 comments
na0d
Sep 232 min read
VARA had Critters!!
NA0D-11 is back up as a proper Winlink station with Internet access ! We seem to have mice or rat critters that have made their way into...
1 view0 comments
na0d
Sep 101 min read
Something Breaks, Something New!
Hi! Thanks for reading all this stuff. Well, I seem to have "lost" the Baxter VARA FM computer. Can't get it to come up remotely. I'll...
1 view0 comments
na0d
Aug 281 min read
Updated site and plans for more stuff!
Van Buren has a better antenna now. Still testing. Updated several parts of the website. Got some gear coming soon and we'll post as it...
0 views0 comments
na0d
Aug 231 min read
Antenna Improvements and some new adds
Easy enough, Van Buren should have some antenna updates shortly for better coverage! Yay. Other sites are doing well. Probably going add...
0 views0 comments
na0d
Jul 41 min read
Van Buren....Hurryyy!!!
Hi! Well, found that the Van Buren repeater controller died a couple weeks ago. Got a new one built! I hope to have it installed 7/5 or...
0 views0 comments
na0d
Jun 121 min read
Baxter is fixed....
Baxter repeater is fixed and working well. Yay! Let's see how long this lasts hahaha. Seriously was just a bad cable and after replacing...
2 views0 comments
na0d
Jun 71 min read
Repeater and APRS Updates
Haven't been here in a bit as I've been busy as all you know what....so here's where we're at! APRS died again at DVLDEN. I may not...
1 view0 comments
na0d
May 61 min read
VARA is back, sort of....
Good morning. In between all the stuff I've got going on right now, we did get NA0D-10 back established with a new radio. It's been...
0 views0 comments
na0d
Apr 272 min read
Lightning, my friends.....
Well, storms yesterday did a number on some stuff. APRS DVLDEN is down to an iGate via a scanner because we lost a radio and FOB. Worse,...
2 views0 comments
na0d
Apr 222 min read
Van Buren NA0D-R3 is ON THE AIR as is VARA-FM/Packet
Well, aside from some needed antenna work, 444.400 is on the air as of yesterday. It's a compromise antenna situation but seems to cover...
2 views0 comments
na0d
Apr 152 min read
More Parts Showing Up!
The Van Buren 444.400 is closer to being complete. DMK URI interface showed up today and a new repeater should be here tomorrow. For some...
1 view0 comments
na0d
Apr 131 min read
VARA and Repeater Updates
I will be moving my VARA Digis to 145.770. This is the same frequency the state EOC is on, as well as some Digis closer to Little Rock....
0 views0 comments
na0d
Apr 91 min read
NA0D-R2 444.050 Baxter Co Update
Figured out my issues and the 444.050 repeater is working well now. Retuned the duplexer, replaced a jumper and tuned the front end coils...
4 views0 comments
bottom of page